CO2 Laser Optics for Cutting Systems

VTE500 meniscus lenses from ULO Optics| A small selection of the plano-convex and meniscus lenses available from ULO Optics. We offer a wide choice of diameters, focal lengths and edge thickness to suit your laser system

Introduction

Cutting optics form a crucial part of your laser system. ULO Optics understands the need to keep your system running, which is why we carry replacement stock for the most commonly used laser optics around the world. ULO Optics uses only the best laser grade material and highest quality coatings, producing low absorption lenses which are useful up to the highest power applications. As well as ensuring we have the most commonly used optics available from stock, our experienced and highly qualified technical team is able to quote for your custom optical requirements. The lists of optics on this page are far from exhaustive - for further information please visit our website, www.ulooptics.com. The majority of our cutting lenses are made from ZnSe, although ZnS, GaAs and Ge lenses are also available.

Plano-Convex Lenses

Many laser systems have been designed to use plano-convex lenses as the standard focusing element. Some customers also prefer to use our plano-convex lenses at longer focal lengths where the spot size differential compared to meniscus lenses is less of a factor.

Plano/Convex Lens - Mazak/Mitsubishi

15PHGP127           ZnSe   D38.0mm   FL127.0mm   ET7.62mm   Standard AR coated
15PHGP190           ZnSe   D38.0mm   FL190.5mm   ET7.62mm   Standard AR coated
15PHGP127- UL    ZnSe   D38.0mm   FL127.0mm   ET7.62mm   UltraLO AR coated

Plano/Convex Lens - Amada

15PEHGP127          ZnSe   D38.1mm   FL127.0mm   ET7.87mm   Standard AR coated
15PEHGP190          ZnSe   D38.1mm   FL190.5mm   ET7.87mm   Standard AR coated
15PEHGP127- UL  ZnSe   D38.1mm   FL127.0mm   ET7.87mm   UltraLO AR coated
15PEHGP190- UL  ZnSe   D38.1mm   FL190.5mm   ET7.87mm   UltraLO AR coated

Plano/Convex Lens - Cincinnati

15CIN130- UL   ZnSe   D1.5"   FL5.13"   ET0.280"   UltraLO AR coated
15CIN194- UL   ZnSe   D1.5"   FL 7.65"  ET0.280"   UltraLO AR coated

Meniscus Lenses

Meniscus lenses form the largest and most popular part of ULO Optics' product range. Optimum meniscus lenses minimise the spot size which in turn increases power density.

Meniscus Lens - TRUMPF/Finn-Power/LVD/Strippit

VTE500           ZnSe   D38.1mm   FL127.0mm   ET7.37mm   Standard AR coated
VTE750           ZnSe   D38.1mm   FL190.5mm   ET7.37mm   Standard AR coated
VTE500- UL   ZnSe   D38.1mm   FL127.0mm   ET7.37mm   UltraLO AR coated
VTE750- UL   ZnSe   D38.1mm   FL190.5mm   ET7.37mm   UltraLO AR coated

Meniscus Lens - Bystronic

15BYS127- UL   ZnSe   D38.05mm   FL127.0mm   ET9.0mm   UltraLO AR coated
15BYS190- UL   ZnSe   D38.05mm   FL190.5mm   ET9.0mm   UltraLO AR coated

Aspheric Lenses & Aberration Free Assemblies

Aspheric lenses and aberration free lens doublets are high performance alternatives to our short focal length ZLF series meniscus lenses. Both options give diffraction limited performance by correcting the spherical aberration that is present in a "best form" meniscus lens. The aspheric surface is most effective in lenses of short focal length. A selection of the aspheric lenses we offer can be seen in Table 3. The alternative solution to counter-acting spherical aberrations is through Umicore Laser Optics' TF series of aberration corrected double element lenses.

Mirrors

ULO Optics offer Si, Cu, and Mo mirrors with various diameters and thicknesses. Our Si mirrors are extremely durable, and combined with our Supermax coating offer refl ectivity greater than 99.85%. Cu mirrors, most suitable to higher power lasers are also Supermax coated to guarantee the same refl ectivity. Another version of a Cu mirror is coated with Gold, offering a more economical alternative where 99% refl ectivity is suffi cient. These are commonly refered to as 'NiCu' type mirrors, due to a layer of Nickel underneath the Gold coating. Mo mirrors are damage resistant, long lasting and are often used in harsh environmental conditions due to their durable nature. Polished Mo mirrors generally refl ect greater than 98% uncoated.

Multi-Element Lens Assemblies

Multi-element lenses combine high quality individual lenses to produce high performance solutions for a variety of applications. Umicore Laser Optics supplies twin spot and triple spot systems that have been custom designed to specifi c customer requirements. If you have a requirement for a dedicated solution please contact us today and let a member of our technical design team offer you a solution.

Phase Retarders

ULO Optics offer a selection of Cu and Si phase retarders. Cu and Si phase retarders are offered with /4 (90) retardation. Umicore's coatings are optimised for the highest possible phase retardation accuracy.

Partial Reflectors/Beam Splitters

The reflectance of standard beam splitters depends on the polarisation. ULO Optics have developed a superior polarisation insensitive coating which eliminates this problem, allowing components to be used to provide a 50:50 power split at 45? incidence angle, refl ecting 50% of both S and P polarisation.

Dual-Focus Lenses

Dual-Focus lenses are revolutionary lenses manufactured exclusively by Umicore Laser Optics, allowing thicker materials to be cut with a given laser power. Additionally, less assist gas is required in the process.